Nikon D610 Reference Manual - Page 276
Exposure and Flash Bracketing, Bracketing Options, Exposure Bracketing
View all Nikon D610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
D Exposure and Flash Bracketing • [Number of shots] and [Increment] can also be selected via the [Auto bracketing] item in the photo shooting menu. • In continuous release modes, shooting will pause after the number of shots specified in the bracketing program have been taken. Shooting will resume the next time the shutter-release button is pressed. • If the memory card fills before all shots in the sequence have been taken, shooting can be resumed from the next shot in the sequence after the memory card has been replaced or shots have been deleted to make room on the memory card. If the camera is turned off before all shots in the sequence have been taken, bracketing will resume from the next shot in the sequence when the camera is turned on. A Bracketing Options When [AE & flash bracketing] is selected, the camera varies both exposure and flash level. Select [AE bracketing] to vary only exposure, [Flash bracketing] to vary only flash level. Note that flash bracketing is available in i-TTL and, where supported, auto aperture (qA) flash control modes only (0 462, 798). A Exposure Bracketing The camera modifies exposure by varying shutter speed and aperture (mode P), aperture (mode S), or shutter speed (modes A and M). If [On] is selected for [ISO sensitivity settings] > [Auto ISO sensitivity control] in modes P, S, and A, the camera will automatically vary ISO sensitivity for optimum exposure when the limits of the camera exposure system are exceeded; in mode M, the camera will first use auto ISO sensitivity control to bring exposure as close as possible to the optimum and then bracket this exposure by varying shutter speed. 230 Shooting Settings