Nikon F100 Instruction Manual - Page 12
Set Focus Mode, Focus Area and AF Area Mode - operator manual
![]() |
UPC - 018208017966
View all Nikon F100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
BASIC OPERATION WWW.LENSINC.NET Set Focus Mode, Focus Area and AF Area Mode 4 Set the focus mode to S (Single Servo AF), focus area to center and AF area mode to g (Single Area AF). 4.1 Set the focus mode selector to S (Single Servo AF). Check points Do not attempt to rotate the lens focus ring manually while the focus mode is set to S or C. With the focus mode set at S (Single Servo AF), shutter cannot be released when the subject is out of focus. See pages 36-43 for details regarding focus mode, focus area and AF area mode. See page 42 for situations where autofocus may not work as expected. 4.3 Rotate the focus area selector lock release to lock focus area. • Make sure to turn the focus mode selector until it clicks into position. • To focus, lightly press the shutter release button (page 27) or keep pressing the AF start button (page 36). · 4: Autofocus detection can be set to start by pressing the AF start button only (page 71). 4.2 Rotate the focus area selector lock release and select center focus area with the focus area selector. 4.4 Set the AF area mode selector to g (Single Area AF). • Set the AF area mode selector firmly. • Pressing the focus area selector up/down/right/left shifts the focus area toward the desired direction. Press the focus area selector while the exposure meter is on (page 37). • Selected focus area is indicated in LCD panel and viewfinder (in red in the viewfinder) (page 37). 22 23
![](/manual_guide/products/nikon-f100-instruction-manual-bc43a3e/12.png)