Nikon SB-5000 AF Speedlight Reference Manual - English - Page 64
Setting the flash output level, When no lens aperture information is transmitted
View all Nikon SB-5000 AF Speedlight manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Flash Modes ˙ Setting the flash output level Highlight the flash output level, and then use the rotary multi selector to change the flash output level. • The flash output level changes in increments of 1/3 EV steps. • When the rotary multi selector is rotated counterclockwise or the rotary multi selector is pressed 3 4, the indicated denominator increases (flash output level decreases). When the rotary multi selector is rotated clockwise or the rotary multi selector is pressed 1 2, the indicated denominator decreases (flash output level increases). • With some cameras, and when using higher shutter speeds with a flash output level higher than M1/2, actual flash output may decrease to C M1/2 level. t When no lens aperture information is transmitted When lens aperture information is not transmitted to the SB-5000, aperture can be set in menu. Aperture; underlined when aperture is set on the SB-5000 C-7