Nikon Z 6 Technical Guide N-Log Recording Edition - Page 7
Enable N‑Log recording., record to card
View all Nikon Z 6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2 Enable N‑Log recording. Return to HDMI > Ad‑ vanced in the setup menu and select On (cannot record to card) for N‑Log setting. Note that N-Log footage is recorded only to the external device, not to the camera memory card. 3 Configure the recorder for HDMI input. For details, see the documentation supplied with the device. 4 Start filming. If On is selected for HDMI > Advanced > External re‑ cording control in the camera setup menu and the recorder supports the Atomos Open Protocol, you can start and stop recording using the camera movie-re‑ cord button (page 10); otherwise, you will need to enable recording on the external device. Contrast can be enhanced for display on the camera during record‑ ing (view assist; page 11). When the camera standby timer expires, the monitor will turn off and HDMI output will end. Choose No limit or a time longer than the anticipated recording time for Custom Setting c3 (Power off delay) > Stand‑ by timer. 7