Nintendo RVLSWFSP User Manual - Page 9

System Setup Mounting the Sensor Bar Above the Screen Mounting the Sensor Bar Below the Screen 1. Remove the protective film from the foam pads on the bottom of the Sensor Bar. 2. For additional stability, you can add adhesive backed foam tape from the supplied sheet. 3. Mount the Sensor Bar to the top of the TV. 1. Remove the protective film from the foam pads on the bottom of the Sensor Bar. 2. For additional stability, you can add adhesive backed foam tape from the supplied sheet. 3. Mount the Sensor Bar to the front edge of the surface the TV is sitting on. Do not place the Sensor Bar below the surface that the TV is sitting on; for example, on shelves below the TV. System Setup System Setup • The front of the Sensor Bar should be aligned close to the front of the TV. 14 • The center of the Sensor Bar should be aligned with the center of the TV. • The front of the Sensor Bar should be aligned with the front of the surface the TV is sitting on. • The center of the Sensor Bar should be aligned with the center of the TV. 15