Nintendo TWLSWDB1 Instruction Booklet - Page 9

Wireless Communication and Game Play Modes NOTE: Use of wireless devices are prohibited in some locations. (See page 3, Radio Frequency Interference.) You will know when your DS is in wireless mode when the Power Indicator LED (green or red) rapidly blinks. This indicates that wireless communication is in progress. The Power Indicator LED will blink rapidly when using PictoChat, playing any game in multiplayer mode, or downloading a game to another DS unit. The Nintendo DS wireless feature allows you to communicate or play games with other people without the use of cables. There are two types of wireless compatible DS games. 2-16 Wireless DS Multi-Card Play requires one Game Card for each DS system used. The number of players that can participate will be indicated under the icon. 2-16 Wireless DS Single-Card Download Play requires only one Game Card for one system (host system). The other players download the game information into their systems (client systems) using the wireless feature. The number of players that can participate will be indicated under the icon. Look for these icons on Nintendo DS game packaging for the type of wireless game play used on specific games and how many players can play simultaneously. DS Multi-Card Play 1. Make sure that all DS systems are turned off, then insert a Game Card into each system. Turn all DS systems on. 2. Use the stylus to touch the game title on the display to start the game. Refer to the instruction booklet for the game you are playing for game play information. DS Single-Card Download Play 1. Make sure that all DS systems are turned off, then insert a Game Card into the system that will be the host system. Turn all DS systems on. 2. Use the stylus to touch the game title on the display of the host system to start the game. 3. On the client systems, touch the DS Download Play panel on the DS Menu Screen. 14 4. On the Game Selection Screen, touch the game title you wish to download (Illustration 14). You will be asked to confirm your choice (Illustration 15). Touch YES to download game information from the host system. Refer to the instruction booklet for the game you are playing for game play information. 14 15 Wireless Signal Strength During wireless game play, an icon will appear on either the upper or lower displays showing the signal strength of the wireless signal. The icon has four modes depending on the signal strength, as shown below. 0 1 2 3 WEAKER STRONGER IMPORTANT WIRELESS COMMUNICATION GUIDELINES: • Begin with the distance between systems at about 30 feet (10 meters) or less and move closer or farther apart as desired, keeping the signal strength at two or more bars for best results. • Keep the maximum distance between systems at 65 feet (20 meters) or less. • The systems should face each other as directly as possible. • Avoid having people or other obstructions between the DS systems. • Avoid interference from other devices. If communication seems to be affected by other devices (wireless LAN, microwave ovens, cordless devices, computers), move to another location or turn off the interfering device. 15