Nokia 1616 Nokia 1616 User Guide in English - Page 4

Get started, Insert the SIM card and battery, Remove the SIM card, Charge the battery, Important

Get Nokia 1616 PDF manuals and user guides View all Nokia 1616 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

4 Get started Get started Insert the SIM card and battery This phone is intended for use with the BL-5CB battery. Safe removal. Always switch the device off and disconnect the charger before removing the battery. Important: Do not use a mini-UICC SIM card, also known as a micro-SIM card, a microSIM card with an adapter, or a SIM card that has a mini-UICC cutout (see figure) in this device. A micro-SIM card is smaller than the standard SIM card. This device does not support the use of micro-SIM cards and use of incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card. 1 Place your finger in the recess at the bottom of the device, and carefully lift and open the back cover (1). 2 Lift the battery, and remove it (2). 3 Insert the SIM card (3). Ensure the contact surface area is facing down and the beveled corner of the SIM card is facing the bottom of the device. 4 Replace the battery (4) and back cover (5, 6, 7). Remove the SIM card Press the release spring (1), and slide out the SIM card (2). Charge the battery Your battery has been partially charged at the factory. If the device indicates a low charge, do the following:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
Get started
Insert the SIM card and battery
This phone is intended for use with the BL-5CB battery.
Safe removal. Always switch the device off and disconnect the charger before removing
the battery.
Important:
Do not use a mini-UICC SIM card, also known as a micro-SIM card, a micro-
SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see figure) in this
device. A micro-SIM card is smaller than the standard SIM card. This device does not
support the use of micro-SIM cards and use of incompatible SIM cards may damage the
card or the device, and may corrupt data stored on the card.
1
Place your finger in the recess at the bottom of the device, and carefully lift and
open the back cover (1).
2
Lift the battery, and remove it (2).
3
Insert the SIM card (3). Ensure the contact surface area is facing down and the
beveled corner of the SIM card is facing the bottom of the device.
4
Replace the battery (4) and back cover (5, 6, 7).
Remove the SIM card
Press the release spring (1), and slide out the SIM card (2).
Charge the battery
Your battery has been partially charged at the factory. If the device indicates a low
charge, do the following:
4
Get started