Nokia BH-505 User Guide - Page 7

ENGLISH Pair and connect the headset Before using the headset, you must pair and connect it to a compatible device. If your mobile device supports the A2DP Bluetooth profile and has a music player feature, you can use the device to also play music through the headset. If your mobile device does not support the A2DP profile, you can separately pair the headset with the mobile device and a music player that supports this profile. If you have paired and connected the headset to your mobile device, disconnect the headset from it before pairing the headset with the music player. To pair and connect the headset to your device if the device supports the Near Field Communication (NFC) feature, activate the feature, and use your device to touch the area shown in figure 10 at the start of this guide. For details on NFC, see the user guide of your device. To pair and connect the headset to your device if the device does not support NFC: 1. Ensure that your mobile device or music player is switched on and the headset is off. 2. If the headset has not been previously paired with a device, switch on the headset. The headset enters pairing mode, and the blue indicator light starts to flash quickly. If the headset has been previously paired with a device, ensure that the headset is switched off, and press and hold the power key (for about 8 seconds) until the blue indicator light starts to flash quickly.