Nokia BH 900 User Guide - Page 6

Charge the battery, Switch the headset on or off, Pair the headset with a compatible phone - bluetooth headset

Page 6 highlights

Get started ■ Charge the battery This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. 1. Connect the charger to a wall outlet. 2. Connect the charger cable to the headset as shown in the figure. The red indicator light is displayed during charging. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 2 hours. 3. When the battery is fully charged, the green indicator light is displayed. Disconnect the charger from the wall outlet and the headset. The fully charged battery has power for up to 8 hours of talk-time or up to 180 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments. When the battery is running out of power, the headset beeps, and the red indicator light starts to flash. ■ Switch the headset on or off To switch on, press and hold the power key. The headset beeps, and the green indicator light starts to flash. The indicator light turns blue when the headset is connected to your phone and ready for use. To switch off, press and hold the power key. The headset beeps, and the red indicator light is displayed briefly. ■ Pair the headset with a compatible phone 1. Switch on your phone and the headset. 2. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. See the user guide of your phone for instructions. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

Get started
6
Charge the battery
This device has an internal, nonremovable, rechargeable battery. Do not
attempt to remove the battery from the device as you may damage the
device.
1.
Connect the charger to a wall outlet.
2.
Connect the charger cable to the
headset as shown in the figure.
The red indicator light is displayed
during charging. If charging does not
start, disconnect the charger, plug it in
again, and retry. Charging the battery fully may take up to 2 hours.
3.
When the battery is fully charged, the green indicator light is
displayed. Disconnect the charger from the wall outlet and the
headset.
The fully charged battery has power for up to 8 hours of talk-time or up
to 180 hours of standby time. However, the talk and standby times may
vary when used with different mobile phones or other compatible
Bluetooth devices, usage settings, usage styles, and environments.
When the battery is running out of power, the headset beeps, and the
red indicator light starts to flash.
Switch the headset on or off
To switch on, press and hold the power key. The headset beeps, and the
green indicator light starts to flash. The indicator light turns blue when
the headset is connected to your phone and ready for use.
To switch off, press and hold the power key. The headset beeps, and the
red indicator light is displayed briefly.
Pair the headset with a compatible phone
1.
Switch on your phone and the headset.
2.
Activate the Bluetooth feature on the phone, and set the phone to
search for Bluetooth devices. See the user guide of your phone for
instructions.