Nokia BH-905 User Manual - Page 7

Get started headset to the device (see "Pair and connect the headset to a Bluetooth device", p. 9). If you plug the CA-143U audio cable into the headset when the headset is connected to a Bluetooth device, the device is disconnected and Bluetooth connectivity is deactivated. Connect using the audio cable The headset is supplied with the Nokia CA-143U audio cable. The headset may also be supplied with adapters to connect the cable to different devices. To extend the length of the audio cable, use the CA144U extension cable. To connect the headset to a device that has the Nokia 3.5 mm AV connector, plug the audio cable into the headset and the AV connector. To connect the headset to a device that has a standard 3.5 mm audio connector, plug the audio cable into the headset and the AD-63 adapter, and insert the adapter into the audio connector. To connect the headset to a device that has the Nokia 2.5 mm AV connector, plug the audio cable into the headset and the AD-52 adapter, and insert the adapter into the AV connector. To connect the headset to a home stereo system that has a standard 6.3 mm headphone connector, plug the audio cable into the headset and the AD-70 adapter, and insert the adapter into the headphone connector. To connect the headset to an airplane audio system that has a 3.5 mm headphone connector, plug the audio cable into the headset and the AD-71 adapter, and insert the adapter into the headphone connector. ■ Charge the battery Before you can connect the headset to a Bluetooth device or use active noise cancellation, you must charge the battery. Before charging the battery, carefully read "Battery and charger information", p. 15. Copyright © 2009 Nokia. All rights reserved. 7