Nokia BH105 User Guide - Page 5

Switch on or off, Pair and connect the headset, power key for about 2 seconds when - bluetooth headset

Page 5 highlights

light is displayed. Disconnect the charger from the headset, then from the wall outlet. The fully charged battery has power for up to 5 hours and 30 minutes of talk time or up to 120 hours of standby time. To check the battery charge when the headset is not connected to a charger, press the power key. If the indicator light is green, the charge level is sufficient. If the light is yellow, you may need to recharge the battery soon. If the light is red, recharge the battery. When the battery charge is low, the headset beeps every 5 minutes and the red indicator light flashes. Switch on or off To switch on, press and hold the power key for about 2 seconds. The headset beeps, and the green indicator light is displayed. The headset tries to connect to the last connected device. To switch off, press and hold the power key for about 2 seconds when the headset is on. The headset beeps, and the red indicator light is briefly displayed. If the headset is not connected to a device within about 30 minutes, it switches off automatically. Pair and connect the headset 1. Ensure that your mobile device is switched on and the headset is off. 2. Press and hold the power key (for about 5 seconds) until the green indicator light starts to flash quickly. 3. Within about 3 minutes, activate Bluetooth connectivity on your Copyright © 2009 Nokia. All rights reserved. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

5
Copyright © 2009 Nokia. All rights reserved.
light is displayed. Disconnect the
charger from the headset, then
from the wall outlet.
The fully charged battery has power
for up to 5 hours and 30 minutes of
talk time or up to 120 hours of
standby time.
To check the battery charge when
the headset is not connected to a
charger, press the power key. If the
indicator light is green, the charge
level is sufficient. If the light is
yellow, you may need to recharge
the battery soon. If the light is red,
recharge the battery.
When the battery charge is low, the
headset beeps every 5 minutes and
the red indicator light flashes.
Switch on or off
To switch on, press and hold the
power key for about 2 seconds. The
headset beeps, and the green
indicator light is displayed. The
headset tries to connect to the last
connected device.
To switch off, press and hold the
power key for about 2 seconds when
the headset is on. The headset
beeps, and the red indicator light is
briefly displayed. If the headset is
not connected to a device within
about 30 minutes, it switches off
automatically.
Pair and connect the headset
1.
Ensure that your mobile device is
switched on and the headset is
off.
2.
Press and hold the power key (for
about 5 seconds) until the green
indicator light starts to flash
quickly.
3.
Within about 3 minutes, activate
Bluetooth connectivity on your