Nokia Bluetooth Headset BH-606 User Guide - Page 4
Charge the battery, Switch on or off, headset, then from the wall outlet.
View all Nokia Bluetooth Headset BH-606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ENGLISH the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. Charge the battery Before charging the battery, carefully read "Battery and charger information". Warning: Use only chargers approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord. 1. Connect the charger to a wall outlet. 2. Connect the charger cable to the charger connector. During charging, the indicator light is on and the headset cannot be used. Charging the battery fully may take up to 2 hours. 3. When the battery is fully charged, the indicator light turns off. Disconnect the charger from the headset, then from the wall outlet. If the headset was connected to your phone before charging, the headset connects to it again. The fully charged battery has power for up to 8 hours of talk time or up to 280 hours of standby time. When the battery is discharged, the headset beeps every minute and the indicator light flashes quickly. Switch on or off To switch on, press and hold the power key for about 2 seconds. The headset beeps, and the indicator light is displayed. The headset tries to connect to a paired phone.