Nokia Extra Power DC-11/DC-11K User Guide - Page 3
Charge the DC-11 device, the power source.
View all Nokia Extra Power DC-11/DC-11K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
ENGLISH Before you can use the DC-11 device to charge the battery in a compatible device, you must charge the DC-11 device. Charge the DC-11 device Before charging the DC-11 device, carefully read "Battery and charger information". Warning: Use only chargers approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord. 1. Connect a compatible charger to a power source. 2. Connect the charger cable to the charger connector on the DC-11 device. The device switches on. The indicator light flashes during charging. If the light is not displayed, check that the charger is properly connected to the DC-11 device. 3. When the DC-11 device is fully charged, the indicator light stops flashing. Disconnect the charger from the DC-11 device, then from the power source. The DC-11 device can also be charged through a USB port of a compatible PC using the Nokia connectivity cable CA-100 or CA-126 (sold separately). Connect one end of the cable to the charger connector on the DC-11 device and the other end to a USB port on the PC. While charging the DC-11 device, you can use it to charge the battery in one or two devices. Connect the device or devices to the DC-11 device.