Nokia Play 360 User Guide - Page 3
Charge the battery, Switch the speaker - bluetooth speaker
View all Nokia Play 360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 2 Volume keys 3 Bluetooth status indicator 4 Bluetooth key 5 Battery status indicator 6 Charger connector 7 Power key 8 Battery cover fixing screw 9 3.5 mm audio input connector Charge the battery Before using the speaker, you must charge the battery. When the battery level of the speaker is low, the battery indicator light flashes. When the battery is charging, the light stays on. After the battery has fully charged, the light switches off. 1 Connect the charger to a wall outlet. 2 Connect the charger cable to the charger connector on the speaker. 3 When the battery is fully charged, first disconnect the charger from the speaker, then from the wall outlet. You can also use a compatible USB cable to charge the battery. Charging over USB can take longer to start and you may not be able to use the speaker immediately. Charging may not work if you connect through a non-powered USB hub. Your speaker charges more quickly when connected to a wall outlet. You can only use the USB connection to charge the battery. Your speaker has an internal, removable battery. To remove the battery, unscrew the battery cover, and gently remove the cover and the battery. Switch the speaker on Press and hold the power key. If you have never paired the speaker with a device, or you have cleared the pairings, pairing mode is activated automatically, and the Bluetooth status indicator starts to flash slowly. If you already have paired the speaker with one or more devices, the speaker connects to the last device it was used with. If the speaker can't connect to the last used device, it connects to the next device on the paired devices list.