Nokia Wireless Clip-on Headset HS-21W User Guide - Page 17
Remove and install the battery
View all Nokia Wireless Clip-on Headset HS-21W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
The HS-21W wireless clip-on headset ■ Remove and install the battery Note: Before changing the cover, always switch off the power and disconnect the device from the charger. Always store and use the device with the covers attached. The headset has a rechargeable LiPo battery. To change the battery: 1. Open the battery cover by gently pushing the release button and sliding the battery cover backwards. (Figure 2.1). 2. Remove the battery. (Figure 2.2). 3. Detach the connector from its space, and detach the battery from the connector. (Figure 2.3). 4. Replace the battery. Place the connector in the space reserved for it, and set the battery in place. (Figure 2.4). 5. Close the battery cover. (Figure 2.5). 6. Make sure that the cover is properly locked in place. (Figure 2.6). 17