NordicTrack 1500 S Instruction Manual - Page 27

4. Calibrate the incline system of the treadmill. Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline system. The treadmill will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system. Touch the Cancel button to return to the maintenance section. When the incline system is calibrated, touch the Finish button. IMPORTANT: Keep pets, feet, and other objects away from the treadmill while the incline system is calibrating. In an emergency, pull the key from the console to stop the incline calibration. 5. Exit the maintenance section. To exit the maintenance section, touch the back button on the screen. HOW TO USE THE WIRELESS NETWORK MODE The console features a wireless network mode that allows you to set up a wireless network connection. 1. Select the main menu. Note: You must have your own wireless network and an 802.11b/g/n router with SSID broadcast enabled (hidden networks are not supported). When a list of networks appears, touch the desired network. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password. An information box will ask if you want to connect to the wireless network. Touch the Connect button to connect to the network or touch the Cancel button to return to the list of networks. If the network has a password, touch the password entry box. A keyboard will appear on the screen. To view the password as you type it, touch the Show Password checkbox. To use the keyboard, see HOW TO USE THE TOUCH SCREEN on page 19. When the console is connected to your wireless network, a checkmark will appear next to the wireless network name. Then, touch the back button on the screen to return to the wireless network mode. To disconnect from a wireless network, touch and hold the name of the wireless network and then touch the Forget Network button. See step 2 on page 21. 2. Select the wireless network mode. If you are having problems connecting to an encrypted network, make sure that your password is correct. Note: Passwords are case-sensitive. Touch your name in the upper-left corner, then touch the Wi-Fi® symbol to enter the wireless network mode. 3. Enable Wi-Fi. Make sure that Wi-Fi is enabled. If it is not, touch the Wi-Fi toggle to enable a wireless connection. Note: The console supports unsecured and secured (WEP, WPA™, and WPA2™) encryption. A broadband connection is recommended; performance depends on connection speed. Note: If you have questions after following these instructions, go to support.iFit.com for assistance. 4. Set up and manage a wireless network connection. When Wi-Fi is enabled, the screen will show a list of available networks. Note: It may take several seconds for the list of wireless networks to appear. 5. Exit the wireless network mode. To exit the wireless network mode, touch the back button on the screen. 27