NordicTrack 7000r Treadmill English Manual - Page 13
How To Use The Manual Mode
View all NordicTrack 7000r Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
HOW TO TURN ON THE POWER Plug in the power cord (see page 11). Next, locate the reset/off circuit breaker near the power cord. Make sure that the circuit breaker is in the reset position. Reset Position Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 12) and attach the clip securely to the waistband of your clothes. Next, insert the key into the console. After a moment, the display will light. Note: When the power is turned on, the program that was selected the last time the Save button was pressed will automatically be reselected. If the Save button has not yet been pressed, the manual mode will be selected. Important: In an emergency situation, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the position of the clip. HOW TO USE THE MANUAL MODE 1 Insert the key into the console. See HOW TO TURN ON THE POWER above. 2 Identify yourself as user A or user B. The console can save program settings for two different users. To identify yourself as user A, press the A button; to identify yourself as user B, press the B button. 3 Select the manual mode. To select the manual mode, press the Programs button re- Track peatedly until a track appears in the center of the display. Make sure that the word "Programs" does not ap- pear below the track. 4 Start the walking belt. To start the walking belt, press the Start button, the Speed increase button, or one of the twelve 1-Step Speed buttons. If the Start button or the Speed increase button is pressed, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed increase and decrease buttons. Each time a button is pressed, the speed setting will change in increments of 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph. Note: After the buttons are pressed, it may take a moment for the walking belt to reach the selected speed setting. If one of the 1-Step Speed buttons is pressed, the walking belt will gradually increase in speed until it reaches the selected speed setting. To stop the walking belt, press the Stop button. The time will begin to flash in the display. To restart the walking belt, press the Start button, the Speed increase button, or one of the 1-Step Speed buttons. 5 Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Incline increase and decrease buttons or one of the twelve 1-Step Incline buttons. Each time the Incline increase or decrease button is pressed, the incline will change by 0.5%. Note: After the buttons are pressed, it may take a moment for the treadmill to reach the selected incline setting. If one of the 1-Step Incline buttons is pressed, the incline will gradually increase until it reaches the selected incline setting. 13