NordicTrack Audio Strider 600 Elliptical English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included hex keys and your own phillips screwdriver wrench , and rubber mallet . , adjustable As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. Wave Washer Large Wave M8 Split M8 Washer (101)-2 Washer (102)-4 Washer (97)-16 (95)-4 M8 x 23mm x 1mm Washer (31)-4 M8 x 23mm x 2mm Washer (96)-8 M10 Split Washer (99)-2 M10 Nylon Locknut (82)-2 M4 x 16mm Screw (78)-6 M4 x 16mm Round Head Screw (80)-21 M8 x 14mm Button Screw (84)-6 M8 x 19mm Button Screw (85)-6 M8 x 23mm Button Screw (86)-4 M10 x 78mm Carriage Bolt (92)-2 M8 x 45mm Button Screw (90)-6 M10 x 80mm Button Screw (93)-2 1. See HOW TO FOLD AND UNFOLD THE ELLIPTICAL EXERCISER on page 11 and unfold the elliptical exerciser. 1 92 While another person lifts the front of the Frame (1), attach the Front Stabilizer (4) to the Frame with two M10 x 78mm Carriage Bolts (92) and two M10 Nylon Locknuts (82). 82 4 1 82 5