NordicTrack Audiostrider 990 Elliptical Canadian English Manual - Page 10
Attach the Left Link Arm 30 to the left Upper
View all NordicTrack Audiostrider 990 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10. Attach the Left Link Arm (30) to the Left Pedal Arm (32) with an M8 x 15mm Button Screw 10 (106), an M8.5 x 16mm x 1.5mm Washer (103), and an Axle Cover (66). 24 Attach the Left Link Arm (30) to the left Upper Body Leg (24) with an M8 x 25mm Button 31 106 Screw (110), two M8.5 x 16mm x 1.5mm Washers (103), two Axle Covers (66), a Link Arm Spacer (74), and an M8 x 15mm Button 66 74 103 103 66 Screw (106) as shown. 110 Attach the Right Link Arm (31) in the same way. 30 106 103 66 32 11. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser. Plug the power cord into the power socket at the rear of the elliptical exerciser (see HOW TO PLUG IN THE POWER CORD on page 11). IMPORTANT: If the ellipical exerciser has been exposed to cold temperatures, allow it to warm to room temperature before plugging in the power cord. If you do not do this, the console displays or other electronic components may become damaged. 10