NordicTrack C 1500 Treadmill English Manual - Page 12
Rear Leveling Foot Nuts 111 are threaded all - treadmill c
View all NordicTrack C 1500 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11. Attach the upper end of the Storage Latch (53) to the Frame (56) with a 3/8" x 1 3/4" Bolt (6) 11 and a 3/8" Nut (11). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the Frame. 56 11 6 53 12. Remove the packaging material from the bottom of the Frame (56). 12 See the inset drawing. Make sure that the 1/2" Rear Leveling Foot Nuts (111) are threaded all the way onto the Rear Leveling Feet (60). Turn the two Rear Leveling Feet all the way into the Frame (56). 56 60 Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 24). If one of the Rear Leveling Feet (60) doesnʼt sit flat on the floor, turn the Rear Leveling Foot until it does and then tighten the 1/2" Rear Leveling Foot Nut (111) against the Frame (56). 111 60 56 60 13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 26 and 27). 12