NordicTrack C 900 Pro Treadmill English Manual - Page 10
Do not overtighten the, Screws., See step 6. Tighten all four 5/16 x 2 1/2, Screws 37., Do not over
View all NordicTrack C 900 Pro Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Start four #10 x 3/4" Screws (9) with four #10 Star Washers (32) into the Pulse Bar (112) and the Handrails (87). Slide the Pulse Bar (112) as far in the direction shown as possible, and then tighten the #10 x 3/4" Screws (9). Do not overtighten the Screws. Remove the wire tie from the Upright Wire (81). Insert the pulse wire (E) from the Pulse Bar (112) through the looped Cable Tie (99) on the right handrail assembly (C). See step 6. Tighten all four 5/16" x 2 1/2" Screws (37). 7 Wire Tie 81 9 32 87 E 99 112 C 87 9 32 8. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove the four indicated 1/4" x 1/2" Screws (4) from the Console Frame (104). These are used in assembly step 11. Attach the Left and Right Cup Holders (36, 27) with eight #8 x 1/2" Screws (1). Do not overtighten the Screws. 8 1 4 36 1 1 27 1 104 4 Console Assembly 10