NordicTrack C 900 Treadmill User Manual - Page 10
IMPORTANT: To avoid damaging the, Crossbar 93, do not use power tools and, do not overtighten the # - console
View all NordicTrack C 900 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove the eight Screws (A) Note: There may be fewer Screws than shown. Next, lift off the Crossbar (93) and the Console Frame (104). Discard the Screws. 8 A 93 104 A A Console Assembly 9. Remove and discard the four preassembled 9 Screws (B). B B 10. IMPORTANT: To avoid damaging the 10 Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9). Orient the Crossbar (93) as shown. Tighten all four #10 x 3/4" Screws (9) about halfway into the Handrails (87, 88). Slide the Crossbar as far forward as possible and tighten the four Screws. 93 9 88 9 87 10
10
9.
Remove and discard the four preassembled
Screws (B).
B
9
B
8.
Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly.
Remove the eight Screws (A) Note: There may
be fewer Screws than shown. Next, lift off the
Crossbar (93) and the Console Frame (104).
Discard the Screws.
93
Console
Assembly
A
8
A
A
104
10.
IMPORTANT: To avoid damaging the
Crossbar (93), do not use power tools and
do not overtighten the #10 x 3/4" Screws (9).
Orient the Crossbar (93) as shown. Tighten all
four #10 x 3/4" Screws (9) about halfway into
the Handrails (87, 88). Slide the Crossbar as far
forward as possible and tighten the four Screws.
93
88
9
10
9
87