NordicTrack C 970 Pro Treadmill English Manual - Page 15

12. Note: If assembled on a smooth surface, the treadmill may roll forward during this step. Raise the Frame (56) to the upright position. Have a second person hold the Frame until step 14 is completed. Remove the two 5/16" x 3/4" Screws (4) from the Latch Crossbar (38). Orient the Latch Crossbar (38) as shown. Make sure that the “"This side toward belt”" sticker (C) is facing the treadmill. Attach the Latch Crossbar to the brackets on the Frame (56) with the two 5/16" x 3/4" Screws (4) that you just removed and two 5/16" Star Washers (11). 12 11 4 56 Brackets 38 C 11 4 13. Orient the Storage Latch (53) so that the decal is facing away from the treadmill as shown. 13 Attach the lower end of the Storage Latch (53) to the bracket on the Base (94) with a 5/16" x 1 3/4" Bolt (6) and a 5/16" Nut (12). Raise the Storage Latch (53) to a vertical position. Then, remove and discard the tie (D). D 53 Decal 12 94 6 15