NordicTrack C4 Si Bike English Manual - Page 11

11. Identify the Right Pedal (21), which is marked with an "R." 11 Using an adjustable wrench, firmly tighten the Right Pedal (21) clockwise into the Right Crank (23). Tighten the Left Pedal (not shown) counterclockwise into the Left Crank (not shown). IMPORTANT: Tighten both Pedals as firmly as possible. After using the exercise cycle for one week, retighten the Pedals. To loosen the strap on the Right Pedal (21), press the indicated tab and pull the strap upward. To tighten the strap, simply pull the end of the strap downward. Adjust the strap on the Left Pedal (not shown) in the same way. 23 21 Strap Tab 12. The Console (4) can use four D batteries (not included); alkaline batteries are recommended. 12 IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic compo- nents. Remove the screw, remove the battery cover, insert the batteries into the battery com- partment, and reattach the battery cover. Make sure to orient the batteries as shown by the diagram inside the battery compartment. To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied AC adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. Screw Battery Cover Batteries 4 Batteries 13. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor. 11