NordicTrack C4000 Treadmill Uk Manual - Page 7
Attach the Left Upright 73 to the Base 83
![]() |
View all NordicTrack C4000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Identify the Left Upright (73) and the Right Upright (74). See the inset drawing. Tie the wire tie in the Right Upright securely around the end of the Upright Wire Harness (75). With the help of a second person, hold the Right Upright near the Right Base Cover (77). Then, pull the other end of the wire tie up through the bottom of the Right Upright until the Upright Wire Harness is routed completely through the Right Upright. Gently pull up on the Upright Wire Harness (75) as you set the Right Upright (74) on the Base (83) inside the Right Base Cover (77). Be careful not to pinch the Upright Wire Harness. Attach the Right Upright (74) to the Base (83) with two Upright Bolts (72) and two Upright Star Washers (90). Note: It may be necessary to tip the top of the Right Upright forward slightly as you thread the Upright Bolts into the Right Upright. Do not tighten the Bolts yet. Attach the Left Upright (73) to the Base (83) in the same way. Note: There are no wires on the left side. With the help of a second person, lower the treadmill off the cardboard stand. Save the cardboard stand for step 7. 3. Identify the Right Upright Sleeve (96) and the Left Upright Sleeve (95). Slide the Right Upright Sleeve onto the Right Upright (74) and the Left Upright Sleeve onto the Left Upright (73). 2 3 73 73 75 74 75 Wire Tie 74 Wire Tie 77 83 90 72 95 "Left" 74 "Right" 96 7
![](/manual_guide/products/nordictrack-c4000-treadmill-uk-manual-c4c4757/7.png)