NordicTrack C990 Cwl Treadmill English Manual - Page 15
If You Do Not Connect The, May Become Damaged When You Turn
View all NordicTrack C990 Cwl Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
12. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do 12 not overtighten the #10 x 3/4" Screws (9). Orient the Pulse Crossbar (93) as shown. Attach the Pulse Crossbar to the Handrails (86) with two 28 #10 x 3/4" Screws (9) and two #10 Star Washers (5); start both Screws, and then tighten them. Make sure not to pinch the Upright Wire (81). Then, firmly tighten the four 5/16" x 2 1/2" Screws (28). 9 5 86 93 9 5 86 28 81 13. W ith the help of a second person, hold the console assembly (K) near the Handrails (86) (only one side is shown). Connect the ground wire (L) from the console assembly to the Console Ground Wire (58) on the Pulse Crossbar (93). Next, insert the Upright Wire (81) through the two indicated looped ties (M) on the console assembly (K). See the inset drawing. Connect the Upright Wire (81) to the console wire (N). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie (A) from the Upright Wire. 13 M K N 81 86 93 A L 58 N 81 15