NordicTrack E 11.5 Elliptical Uk Manual - Page 11
Insert the Link Arm Axle 114 into the Right
View all NordicTrack E 11.5 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
9. Orient the Ramp Cover (131) around the Upright (5) as shown. 9 Press the Mounts (not shown) on the underside of the Ramp Cover (131) into the Ramp (130). 131 5 130 10. Apply grease to a Link Arm Axle (114). 10 Insert the Link Arm Axle (114) into the Right Upper Body Leg (6) and the Right Link Arm (43) from the side shown. Insert a hex key into the M8 x 35mm Screw (149) in the Link Arm Axle (114). Using a second hex key, tighten another M8 x 35mm Screw (149), a Small Axle Cover (56), and an M8 Washer (95) into the other end of the Link Arm Axle (114). Tip: Avoid damaging the Small Axle Cover when tightening the Screw. Repeat this step on the other side of the elliptical. 114 149 Grease 6 43 95 56 149 11
11
9
9.
Orient the Ramp Cover (131) around the Upright
(5) as shown.
Press the Mounts (not shown) on the underside
of the Ramp Cover (131) into the Ramp (130).
5
131
130
6
43
95
56
10. Apply grease to a Link Arm Axle (114).
Insert the Link Arm Axle (114) into the Right
Upper Body Leg (6) and the Right Link Arm (43)
from the side shown.
Insert a hex key into the M8 x 35mm Screw
(149) in the Link Arm Axle (114).
Using a second hex key, tighten another M8 x
35mm Screw (149), a Small Axle Cover (56),
and an M8 Washer (95) into the other end of the
Link Arm Axle (114).
Tip: Avoid damaging the
Small Axle Cover when tightening the Screw.
Repeat this step on the other side of the
elliptical.
10
114
149
Grease
149