NordicTrack E 8.7 Elliptical English Manual - Page 13

Pulse Wire 117, and the Receiver Wire 112

Get NordicTrack E 8.7 Elliptical PDF manuals and user guides View all NordicTrack E 8.7 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

11. Identify the Right Pedal Arm Cover A (41) and the Right Pedal Arm Cover B (42) and orient 11 them as shown. Attach the Right Pedal Arm Cover B (42) to the Right Pedal Arm (37) with two M4 x 16mm Screws (97). Then, press the Right Pedal Arm Cover A (41) onto the Right Pedal Arm Cover B (42). Repeat this step on the other side of the elliptical. 41 97 37 42 12. While a second person holds the Console (8) near the Upright (4), plug the Upper Wire (116), the Pulse Wire (117), and the Receiver Wire (112) into the matching receptacles on the back of the Console. 12 8 The connectors on the Upper Wire (116), the Pulse Wire (117), and the Receiver Wire (112) should slide easily into the receptacles and snap into place. If a connector does not slide easily into a receptacle, turn the connector and try again. If you do not connect the connectors properly, the console may become damaged. 116 4 117 112 97 Tip: Avoid pinching the wires. Attach the Console (8) to the Upright (4) with four M4 x 16mm Screws (97). Avoid pinching the wires 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
13
11
11. Identify the Right Pedal Arm Cover A (41) and
the Right Pedal Arm Cover B (42) and orient
them as shown.
Attach the Right Pedal Arm Cover B (42) to
the Right Pedal Arm (37) with two M4 x 16mm
Screws (97).
Then, press the Right Pedal Arm Cover A (41)
onto the Right Pedal Arm Cover B (42).
Repeat this step on the other side of the
elliptical.
41
97
37
42
4
8
12
12. While a second person holds the Console (8)
near the Upright (4), plug the Upper Wire (116),
the Pulse Wire (117), and the Receiver Wire
(112) into the matching receptacles on the back
of the Console.
The connectors on the Upper Wire (116), the
Pulse Wire (117), and the Receiver Wire (112)
should slide easily into the receptacles and
snap into place.
If a connector does not slide
easily into a receptacle, turn the connector and
try again.
If you do not connect the connectors
properly, the console may become damaged.
Tip: Avoid pinching the wires.
Attach the
Console (8) to the Upright (4) with four M4 x
16mm Screws (97).
Avoid pinching
the wires
116
97
117
112