NordicTrack E 9.9 Elliptical English Manual - Page 14
Shield Cover 75 onto the Left and Right Shields
View all NordicTrack E 9.9 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
12. Apply grease to a Pedal Arm Axle (64). 12 Next, slide an M8 Washer (97) and an Axle Spacer (77) onto an M8 x 13mm Screw (82), and tighten the Screw a few turns into the Pedal Arm Axle (64). While a second person holds the front end of the Right Pedal Arm (58) inside the bracket on the Right Upper Body Leg (60), insert the Pedal Arm Axle (64) into both parts. Slide an M8 Washer (97) and an Axle Spacer 99 (77) onto another M8 x 13mm Screw (82), and tighten the Screw a few turns into the Pedal Arm Axle (64). Then, tighten both Screws at the same time. Repeat this step on the other side of the elliptical. See assembly step 5. Tighten the M10 x 25mm Screws (99). 82 97 77 60 Grease 64 77 97 58 82 13. Orient the Shield Cover (75) assembly as shown. 13 While a second person holds the Shield Cover (75) assembly near the Upright (4), connect the Fan Extension Wire (146) to the Fan Wire (136). Tip: Avoid pinching the wires. Press the Shield Cover (75) onto the Left and Right Shields (73, 74). 75 Avoid pinching the wires 4 73, 74 146 136 14