NordicTrack E125 Bench English Manual - Page 7

4. Attach the Backrest Plate (6) and the Backrest (7) to the Backrest Frames (5) with four M6 x 4 60mm Screws (19) and four M6 Washers (23). 7 See step 3 and tighten the M10 Locknuts (24). 6 5 23 19 23 19 5. Pull the Backrest Knob (15) out as far as it will go. Insert the Backrest Bracket (4) into the Seat 5 Frame (3), and engage the Backrest Knob in one of the holes in the Backrest Bracket. Make sure that the Back Rest Knob is securely engaged in a hole. Apply a small amount of the included grease to an M10 x 256mm Bolt (17). Attach the Backrest 24 5 22 17 Frames (5) to the Seat Frame (3) with the Bolt, two M10 Washers (22), and two M10 Locknuts (24). Do not overtighten the Locknuts; the Backrest must pivot freely. 3 5 24 22 4 15 7