NordicTrack E4.2 Elliptical Uk Manual - Page 8
Tip: To prevent the Wire Harness 42
View all NordicTrack E4.2 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. Orient the Upright (2) and the Top Shield Cover (37) as shown. Slide the Top Shield Cover 4 upward onto the Upright. Have a second person hold the Upright (2) near the Frame (1). See the inset drawing. Locate the wire tie in the Upright (2). Tie the lower end of the wire tie to the Wire Harness (42). Next, pull the upper end of the wire tie upward out of the top of the Upright. Tip: To prevent the Wire Harness (42) from falling into the Upright (2), secure the Wire Harness with the wire tie. Wire Tie 37 2 42 1 2 42 1 Wire Tie 5. Slide the Upright (2) onto the Frame (1). Tip: Have a second person hold the Top 5 Shield Cover (37) out of the way. 42 Tip: Avoid pinching the Wire Harness (42). Attach the Upright (2) with four M10 x 20mm Screws (79) and four M10 Split Washers (78). Slide the Top Shield Cover (37) downward and press it into the Frame (1). Avoid pinching the Wire Harness (42) 2 37 79 78 1 78 79 8