NordicTrack Elite 5700 Treadmill English Manual - Page 15
Screws 5. The Truss Head Screws
View all NordicTrack Elite 5700 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
12. Set the Right Handrail Top Cover (81) on the right Handrail (74). Attach the Right Handrail Bottom Cover (82) to the Handrail and to the Right Handrail Top Cover with four #8 x 3/4" Truss Head Screws (24). IMPORTANT: Do not confuse the Truss Head Screws with the #8 x 3/4" Screws (5). The Truss Head Screws have larger, flatter heads. Start all four Screws, and then tighten them. Attach the Left Handrail Top and Bottom Covers (73, 75) to the left Handrail (74) as described above. 12 73 74 75 24 24 81 74 24 82 24 13. Raise the Frame (52) to the position shown. Have a second person hold the Frame until 13 step 14 is completed. Orient the Storage Latch (56) so that the decal is facing away from the treadmill as shown. I 52 Attach the lower end of the Storage Latch (56) to 56 the bracket on the Upright (84) with a 5/16" x 1 3/4" Bolt (3) and a 5/16" Nut (9). Raise the Storage Latch (56) to a vertical position. Then, remove and discard the tie (I). Decal 9 84 3 15