NordicTrack Elite 5750 Treadmill User Manual - Page 18

19. Firmly tighten the four 3/8" x 2 3/4" Screws (23) and the four 3/8" x 1 1/4" Screws (20). 19 Next, slide the Left and Right Base Covers (89, 90) down until they snap into place. 90 89 23 20 23 23 20 20. Attach the Tablet Holder (121) to the console assembly (K) with four M4 x 16mm Screws (108). Note: Start the two top Screws first, and then start the two bottom Screws. Be careful not to overtighten the Screws. IMPORTANT: The Tablet Holder (121) is designed for use with most full-size tablets. Do not place any other electronic device or object in the Tablet Holder. 20 Start First 108 121 108 K 21. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 38 and 39). Note: Extra parts may be included. 18