NordicTrack Freestrider 35 S Elliptical English Manual - Page 19

HOW TO USE THE MAINTENANCE MODE The console features a maintenance mode that allows you to access usage information and to view and change console settings. 1. Press any button or begin striding to activate the console. 3. View and reset the usage information if desired. The first section of the center display will show the total number of hours that the elliptical strider has been used, the total number of vertical feet that the pedals have climbed, and the total distance that the pedals have been moved. See HOW TO ACTIVATE THE CONSOLE on page 15. 2. Select the maintenance mode. Press and hold down the FAN button for a few seconds to select the maintenance mode. When the maintenance mode is selected, usage information for the elliptical strider will appear in the center display. To reset the usage information to zero, press and hold down the Resistance increase and decrease buttons simultaneously for several seconds. 4. Adjust the contrast level of the console displays if desired. To adjust the contrast level of the console displays, press the STRIDE LENGTH increase and decrease buttons until the console displays show the desired contrast. 5. Exit the maintenance mode. Press the QUICK START or the WORKOUT START button to exit the maintenance mode. 19