NordicTrack Grt 320 Bench English Manual - Page 7
Leg Lever 4 to the Front Leg 8 with the Bolt
View all NordicTrack Grt 320 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Attach the Front Leg (8) to the Frame (2) with two M10 x 65mm Bolts (18), two M10 Washers (24), 3 and two M10 Nylon Locknuts (19). 19 24 18 8 2 19 4. Tap three 45mm Square Inner Caps (21) into the Leg Lever (4) as shown. 4 Tap a 1" Round Inner Cap (23) into the indicated end of the Weight Tube (41). Insert the Weight Tube (41) into the Leg Lever (4). Press a 1" Angle Cap (29) onto the indicated end of the Weight Tube. 21 41 21 4 29 5. Lubricate an M10 x 72mm Bolt (40). Attach the Leg Lever (4) to the Front Leg (8) with the Bolt and an M10 Nylon Locknut (19). Do not overtighten the Nylon Locknut. The Leg Lever must be able to pivot freely. Attach the Spacer (37) to the Leg Lever (4) with the M8 x 58mm Bolt (39), two M8 Washers (38), and an M8 Nylon Locknut (13). Note: The Spacer will fit tightly inside the Leg Lever. 23 21 5 19 4 39 38 37 8 40-Lubricate 38 13 6. Press four 1" Square Inner Caps (12) into the Backrest Tubes (5, 42). Press two 1" x 2" Inner Caps (36) into the adjustment tubes. With the wide end of the Backrest (6) positioned as shown, attach the Backrest Tubes (5, 42) to the Backrest with four M6 x 38mm Screws (16) and four M6 Washers (25). Note: The Backrest Tubes and the Backrest must be oriented exactly as shown. 6 6 Wide End 5 12 25 16 36 7 12 25 42 16 Adjustment Tubes 25 16