NordicTrack Grt270 User Manual - Page 7

Brace with two M8 Washers 35 and two M8 Nylon

Get NordicTrack Grt270 PDF manuals and user guides View all NordicTrack Grt270 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

3. Slide a Brace (2) onto the bracket on one of the 3 Uprights (1). Attach the Brace to the Upright with two M10 x 65mm Bolts (26), four M10 Washers (3), and two M10 Nylon Locknuts (7). Do not tighten the Nylon Locknuts yet. Slide the Upright (1) and the Brace (2) onto the M10 x 65mm Carriage Bolts (24) and the M8 x 65mm Carriage Bolts (38) in the left Base (4). Attach the Upright with two M10 Nylon Locknuts (7). Attach the Brace with two M8 Washers (35) and two M8 Nylon Locknuts (37). Do not tighten the Nylon Locknuts yet. 4. Slide the remaining Brace (2) onto the bracket on the other Upright (1). Attach the Brace to the Upright with 4 two M10 x 65mm Bolts (26), four M10 Washers (3), and two M10 Nylon Locknuts (7). Do not tighten the Nylon Locknuts yet. Slide the Upright (1) and the Brace (2) onto the M10 x 65mm Carriage Bolts (24) and the M8 x 65mm Carriage Bolts (38) in the right Base (4). Attach the Upright with two M10 Nylon Locknuts (7). Attach the Brace with two M8 Washers (35) and two M8 Nylon Locknuts (37). Do not tighten the Nylon Locknuts yet. 7 1 7 3 2 3 26 Bracket 37 7 4 24 35 38 1 26 3 2 37 Bracket 37 35 38 7 4 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
4.
Slide the remaining Brace (2) onto the bracket on the
other Upright (1). Attach the Brace to the Upright with
two M10 x 65mm Bolts (26), four M10 Washers (3),
and two M10 Nylon Locknuts (7).
Do not tighten the
Nylon Locknuts yet.
Slide the Upright (1) and the Brace (2) onto the M10
x 65mm Carriage Bolts (24) and the M8 x 65mm
Carriage Bolts (38) in the right Base (4). Attach the
Upright with two M10 Nylon Locknuts (7). Attach the
Brace with two M8 Washers (35) and two M8 Nylon
Locknuts (37).
Do not tighten the Nylon Locknuts
yet.
4
7
3.
Slide a Brace (2) onto the bracket on one of the
Uprights (1). Attach the Brace to the Upright with two
M10 x 65mm Bolts (26), four M10 Washers (3), and
two M10 Nylon Locknuts (7).
Do not tighten the
Nylon Locknuts yet.
Slide the Upright (1) and the Brace (2) onto the M10
x 65mm Carriage Bolts (24) and the M8 x 65mm
Carriage Bolts (38) in the left Base (4). Attach the
Upright with two M10 Nylon Locknuts (7). Attach the
Brace with two M8 Washers (35) and two M8 Nylon
Locknuts (37).
Do not tighten the Nylon Locknuts
yet.
3
1
7
3
3
Bracket
24
38
7
26
2
4
35
37
1
26
7
3
4
38
2
24
3
7
37
35
Bracket