NordicTrack Gx 2.7 U Bike English Manual - Page 8

2. Using a standard screwdriver, remove the Shield Cover (26) from the Left and Right Shields 2 26 (37, 58). If there are shipping tubes (not shown) attached to the rear of the Frame (1), remove and discard the shipping screws and the shipping tubes. 37, 58 Next, set a sturdy piece of packing material under the rear of the Frame (50). Have a second person hold the Frame to prevent it from tipping while you complete this step. Identify the Rear Stabilizer (44), which has a handle. Attach the Rear Stabilizer (44) to the Frame (50) with two M8 x 70mm Screws (46). 44 Then, remove the packing material from under the rear of the Frame (50). 50 46 3. If there are shipping tubes (not shown) attached to the front of the Frame (1), remove and discard 3 the shipping screws and the shipping tubes. Next, set a sturdy piece of packing material under the front of the Frame (50). Attach the Front Stabilizer (63) to the Frame (50) with two M8 x 70mm Screws (46). Then, remove the packing material from under the front of the Frame (50). 63 46 50 8