NordicTrack Gx 4.7 Bike English Manual - Page 13

Handlebar 14. Attach the Console Cover

Get NordicTrack Gx 4.7 Bike PDF manuals and user guides View all NordicTrack Gx 4.7 Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

12. While a second person holds the Console (15) near the Handlebar (14), plug the Main Wire (77) 12 and the Pulse Wire (84) into the receptacles on the Console. 15 84 77 14 49 The connectors on the Main Wire (77) and the Pulse Wire (84) should slide easily into the 49 receptacles and snap into place. If a connector does not slide easily into a receptacle, turn the connector and try again. If you do not connect the connectors properly, the Console (15) may become damaged when you use the exercise bike. Insert the excess wire into the Handlebar (14). Avoid pinching the wires Tip: Avoid pinching the wires. Attach the Console (15) to the Handlebar (14) with four M4 x 16mm Screws (49). Start all the Screws, and then tighten them. 13. Slide the Console Cover (16) upward against the Handlebar (14). Attach the Console Cover with 13 two M4 x 16mm Screws (49). 49 14 16 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
13
12
77
15
14
49
49
84
12. While a second person holds the Console (15)
near the Handlebar (14), plug the Main Wire (77)
and the Pulse Wire (84) into the receptacles on
the Console.
The connectors on the Main Wire (77) and the
Pulse Wire (84) should slide easily into the
receptacles and snap into place.
If a connector
does not slide easily into a receptacle, turn the
connector and try again.
If you do not connect
the connectors properly, the Console (15) may
become damaged when you use the exercise
bike.
Insert the excess wire into the Handlebar (14).
Tip: Avoid pinching the wires.
Attach the
Console (15) to the Handlebar (14) with four M4
x 16mm Screws (49).
Start all the Screws, and
then tighten them.
Avoid pinching
the wires
13
13. Slide the Console Cover (16) upward against the
Handlebar (14). Attach the Console Cover with
two M4 x 16mm Screws (49).
14
49
16