NordicTrack Gx 5.5 Sport Bike English Manual - Page 12

Frame 1 and the Chain Guard 14.

Page 12 highlights

13. Have a second person hold the Console (48) near the Handlebar (5). Connect the wire on the Console to the Extension Wire (50). 13 Avoid pinching the wires 48 Insert the excess wire into the Handlebar (5). Tip: Avoid pinching the wires. Slide the Console (48) onto the Handlebar (5). Attach the Console with four #8 x 5/8" Screws (51). 5 50 51 14. Tighten three #8 x 2 1/4" Screws (52) into the Frame (1) and the Chain Guard (14). 14 Identify the Right Pedal (35). Using an adjustable wrench, firmly tighten the Right Pedal (35) clockwise into the Right Crank Arm (31). Tighten the Left Pedal (38) counterclockwise into the Left Crank Arm (not shown). 52 52 38 52 14 1 35 31 15. After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it functions properly. Make sure that all parts are properly tightened before you use the exercise bike. Note: Extra parts may be included. Place a mat beneath the exercise bike to protect the floor. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

12
14
15.
After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the exercise bike.
Note: Extra parts may be included. Place a mat beneath the exercise bike to protect the floor.
14. Tighten three #8 x 2 1/4" Screws (52) into the
Frame (1) and the Chain Guard (14).
Identify the Right Pedal (35).
Using an adjustable wrench,
firmly tighten
the
Right Pedal (35)
clockwise
into the Right Crank
Arm (31).
Tighten the Left Pedal (38)
counterclockwise
into the Left Crank Arm (not shown).
35
31
38
52
52
52
14
1
13
13. Have a second person hold the Console (48)
near the Handlebar (5). Connect the wire on the
Console to the Extension Wire (50).
Insert the excess wire into the Handlebar (5).
Tip: Avoid pinching the wires.
Slide the
Console (48) onto the Handlebar (5). Attach the
Console with four #8 x 5/8" Screws (51).
48
5
50
51
Avoid pinching
the wires