NordicTrack Gx 7.0 Pro Bike English Manual - Page 6

ASSEMBLY •• To watch an assembly video, go to http://productvideo.co/ assembly/sears/nordictrack or use your mobile phone or smartphone to read the QR code at the right. •• Assembly requires two persons. •• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. •• Left parts are marked “"L”" or “"Left”" and right parts are marked “"R”" or “"Right.”" •• To identify small parts, see page 5. In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver adjustable wrench Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Set a sturdy piece of packing material under the rear of the Frame (1). Have a second person hold the Frame to prevent it from tipping while you complete this step. Orient the Rear Stabilizer (16) as indicated by the sticker. Attach the Rear Stabilizer to the Frame (1) with two M10 x 122mm Screws (65). Remove the packing material. 1 16 1 65 2. Set a sturdy piece of packing material under the front of the Frame (1). Have a second person 2 hold the Frame to prevent it from tipping while you complete this step. Orient the Front Stabilizer (15) so that the wheels are facing away from the exercise bike. Attach the Front Stabilizer to the Frame (1) with two M10 x 122mm Screws (65). Remove the packing material. Wheel 65 15 1 6