NordicTrack Gx4.0 Bike English Manual - Page 7
the Wire Harness 89 and the Frame Pulse
View all NordicTrack Gx4.0 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Slide the Shield Cover (5) upward onto the Upright (4). 3 Have a second person hold the Shield Cover (5) around the Upright (4) until you complete step 4. Tip: Avoid pinching the wires inside the Frame (1). Slide the Upright (4) onto the Frame. Attach the Upright (4) with five M8 x 16mm Patch Screws (60) and five M8 Split Washers (61). Avoid pinching 5 the wires 4 60 61 61 60 61 60 1 4. Locate the wire tie inside the Upright (4). Then, locate the Wire Harness (89) and the Frame Pulse Wire (91) inside the Frame (1). Tie the lower end of the wire tie to the ends of the Wire Harness (89) and the Frame Pulse Wire (91). Then, pull the other end of the wire tie upward until the Wire Harness (89) and the Frame Pulse Wire (91) are routed completely through the Upright (4). Then, slide the Shield Cover (5) downward and press it onto the Right and Left Front Shields (21, 22). 4 Wire Tie 22 5 Wire Tie 91 4 89 1 21 7