NordicTrack Powertread 1500 English Manual - Page 10
TIME/PACE display
View all NordicTrack Powertread 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6 Follow your progress with the four displays. PULSE/CALORIES display This display shows the your heart rate* and the approximate number of calories you have burned during your workout. The display will change from one number to the other every seven seconds. Indicators below the display will show which number is currently shown. *For your heart rate to be shown, you must wear the optional CardioTrackª heart rate monitor. TIME/PACE display This display shows the total time that the walking belt has been moving and your current pace (pace is measured in minutes per mile). The display will change from one number to the other every seven seconds. Indicators below the display will show which number is currently shown. Note: When an INCLINE program is selected, the display will show the time remaining in the program rather than the elapsed time. SPEED display This display shows the current speed of the walking belt. Note: When the SPEED buttons are pressed, the display will show the selected speed setting for six seconds. The display will then show the actual speed of the walking belt. Note: The speed can be shown in either miles per hour (mph) or kilometers per hour (kph). The KPH indicator beside the SPEED display will light when the speed is shown in kph. To change the unit of measurement, first hold down the START/ ENTER button while inserting the key into the console. An ÒEÓ for english (miles) or an ÒMÓ for metric (kilometers) will appear in the PULSE/CALORIES display. Press the SPEED Ò+Ó button to change the unit of measurement. Remove and then reinsert the key. INCLINE/DISTANCE display This display shows the distance that the walking belt has moved and the current incline level of the treadmill. Every seven seconds, the display will change from one number to the other. Indicators below the display will show which number is currently shown. Note: When the INCLINE buttons are pressed, the display will change to show the selected incline setting. If the KPH indicator beside the SPEED display is dark, the distance will be displayed in miles. If the KPH indicator is lit, the distance will be displayed in kilometers. 7 When you are finished exercising, stop the walking belt and remove the key. Step onto the foot rails and press the STOP button. Change the incline of the treadmill to 1.5%. The incline must be at 1.5% before the treadmill is folded to the storage position or the treadmill may be damaged. Next, remove the key from the console. Store the key in a secure place. In addition, press the on/off switch to the off position. (See the drawing near the top of page 9.) 10