NordicTrack Powertread 2000 User Manual - Page 7
Attach the Storage Latch 5 and the two Latch Spacers
View all NordicTrack Powertread 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Locate the two tabs on the Reading Rack (12). Slide the tabs up into the two slots in the front of the Console (78). 4 Attach the Reading Rack to the Console with the six Screws (43). 12 Tabs 43 78 43 5. Attach a Weight Rack (112) to each Upright (70) with two Screws (43) as shown. 5 112 115 Refer to the inset drawing. Insert a 2-lb. Handle (115) and two 1-lb. Weights (114) into each Weight Rack (112). 43 114 114 112 6. Remove the two indicated Screws (43) from the left Upright (70). 6 Attach the Storage Latch (5) and the two Latch Spacers (93) to the left Upright (70) with the two Screws (43). Be careful not to overtighten the Screws. Note: If it is difficult to fold or lower the treadmill, remove one or both of the Latch Spacers (93). 7. Remove the backing from the Wrench Clip (88). Press the Wrench Clip onto the Upright (70) in the indicated location. 7 Press the Allen Wrench (87) into the Wrench Clip 112 70 43 70 93 5 43 70 87 88 8. Make sure that all parts of the treadmill are properly tightened. Place a mat beneath the treadmill to protect the floor or carpet. 7