NordicTrack Rx 2000 Instruction Manual - Page 5

ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Assembly requires the following tool(s): one Phillips screwdriver one adjustable wrench To avoid damaging parts, do not use power tools. 1.Go to www.iconsupport.eu on your computer and register your product. • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Service (see the front cover of this manual) and register your product. STEP 1 Firstly remove the limiting base (66) from the rear end of rowing rail (4). Insert the slide rest (38) onto the rowing rail (4) from behind. And then insert Cushion (11) on the rear end of rowing rail (4). Tighten the tail braced combination (2) and Cushion (11) to the rowing rail (4) with hexagon bolts (10) and hex nut (49) . Tighten the limiting base (66)to the rowing rail (4) with limiting base axle (65) flat washer (67)and screw(68). 5