NordicTrack Rx 800 Rower Uk Manual - Page 14

The scan mode will be selected automatically when you turn on the console. To view the watts, strokes per minute, time, distance, or strokes mode for continuous display, press the Priority Display button repeatedly until the desired mode is shown in the display. To return to the scan mode, press the Priority Display button repeatedly until the word SCAN appears in the center display. To reset the displays to zero, press the On/Reset button. Change the volume level of the console by pressing the Vol increase and decrease buttons. HOW TO USE THE SOUND SYSTEM To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your MP3 player, CD player, or other personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. Next, press the play button on your personal audio player. Adjust the volume level using the Vol increase and decrease buttons on the console or the volume control on your personal audio player. 5. When you are finished exercising, the console will turn off automatically. If the row bar does not move for a few seconds, the console will pause. The console has an auto-off feature. If the row bar does not move and the console buttons are not pressed for a few minutes, the power will turn off automatically to save the batteries. 14