NordicTrack S6000 English Manual - Page 12
Attach the Headrest 90 and the Headrest Base
View all NordicTrack S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
20. Attach a 2 3/4" Pulley (23) to the right Press Arm (8) with an M10 x 53mm Button Bolt (61), two M10 Washers (71), two 5mm Spacers (25), two Finger Guards (27), and an M10 Nylon Locknut (73). See the inset drawing. Orient the Finger Guards and Pulley as shown. Make sure the Press Arm Cable (30) is in the groove of the Pulley. 21. Make sure the Press Arm Cable (30) is routed under the indicated welded rods. Attach a "V"-pulley (22) to the Swivel Arm (16) with an M10 x 64mm Button Bolt (75), two M10 Washers (71), two 5mm Spacers (25), and an M10 Nylon Locknut (73). 22. Attach the Backrest (18) and the Backrest Base (88) to the Upright (3) with the two M6 x 25mm Screws (60) and the indicated M6 x 140mm Screw (79). 20 30 73 25 71 27 8 23 27 25 61 71 21 Welded Rods 73 71 25 16 25 75 71 30 22 22 88 27 27 25 79 60 60 18 3 23. Attach the Headrest (90) and the Headrest Base 23 (89) to the Upright (3) with the two indicated M6 x 140mm Screw (79). 89 90 3 79 12