NordicTrack Sl528 Exercise Bike English Manual - Page 7
attach the Left Front Side Shield to the Right Front
View all NordicTrack Sl528 Exercise Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. While another person holds the Upright (2) near the Upright Frame (5), connect the Upper Wire Harness (42) to the Middle Wire Harness (51). Next, gently pull the upper end of the Upper Wire Harness to remove the slack from the Wire Harnesses while inserting the Upright into the Upright Frame. Be careful to avoid pinching the Wire Harnesses. Attach the Upright (2) to the Upright Frame (5) with two M10 x 97mm Button Screws (77), two M10 Split Washers (71), and two Curved Spacers (76). Make sure that the concave end of each Curved Spacer is facing the Frame. Be careful to avoid damaging the Wire Harnesses (42, 51). 4 2 71 76 77 Be careful to avoid pinching the Wire Harnesses. 42 51 71 76 5 5. Attach the Left Front Side Shield (13) to the left side of the Upright Frame (5) with two M4 x 16mm Screws (57). Attach the Right Front Side Shield (14) to the right side of the Upright Frame in the same way. Next, attach the Left Front Side Shield to the Right Front Side Shield with two M4 x 16mm Screws (57). 5 13 57 14 57 57 5 6. Pull the Upper Wire Harness (42) up through the Handlebar (3) while inserting the Handlebar into the Upright (2). Be careful to avoid pinching the Upper Wire Harness. Attach the Handlebar (3) to the Upright (2) with two M10 x 97mm Button Screws (77), two M10 Split Washers (71), two Curved Spacers (76), and two M10 Nylon Locknuts (65). Make sure that the concave end of each Curved Spacer is turned toward the Frame. Be careful to avoid damaging the Upper Wire Harness (42). Attach the Water Bottle Holder (74) to the Upright (2) with two M4 x 22mm Screws (60). 57 6 77 71 76 2 7 3 Be careful to avoid pinching 42 the Wire Harness (42). 65 74 60