NordicTrack Spacesaver Se 7i Elliptical Enc Manual - Page 8

ASSEMBLY • Assembly requires two persons. • Assembly requires only the included tool(s). • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. 1. Go to www.iconservice.ca/CustomerService/ registration and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Service (see the front cover of this manual) and register your product. 2. With the help of another person, place some packing inserts from the packing material under 2 the rear of the Frame (1) so that the Frame is lifted off the floor. Have another person hold the elliptical to prevent it from moving from side to side until this step is completed. If there are shipping supports attached to the rear of the Frame (1), remove the screws from the shipping supports, and discard the screws and the shipping supports. Attach the Rear Stabilizer (70) to the Frame (1) with two M10 x 120mm Screws (84). Then, 70 remove the packing inserts and lower the Rear Stabilizer. 1 84 8