NordicTrack T 14.2 English Manual - Page 11

Orient the Pulse Crossbar 81 as shown. Attach

Get NordicTrack T 14.2 PDF manuals and user guides View all NordicTrack T 14.2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

9. Identify the Left and Right Trays (95, 96). 9 Attach the Left and Right Trays (95, 96) to the Console Base (98) with eight #8 x 1/2" Screws (1). Tip: It may be easier to start the two inside Screws and then slide the Trays into 1 place before tightening the other six Screws. Note: It may be necessary to rotate the Console Frame (101) upward when attaching the Left and Right Trays (95, 96). 96 1 101 1 98 95 1 1 10. IMPORTANT: To avoid damaging the Pulse Crossbar (81), do not use power tools and do 10 not overtighten the #10 x 3/4" Screws (4). Orient the Pulse Crossbar (81) as shown. Attach the Pulse Crossbar to the Handrails (79) with four #10 x 3/4" Screws (4) and four #10 Star Washers (5). Start all four Screws, and then tighten them.  Make sure that the Upright Wire (91) is not pinched. Firmly tighten the four 5/16" x 2 3/4" Screws (12). 81 91 4 5 79 12 4 79 5 12 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
11
98
96
95
101
1
1
9
9.
Identify the Left and Right Trays (95, 96).
Attach the Left and Right Trays (95, 96) to the
Console Base (98) with eight #8 x 1/2" Screws
(1).
Tip: It may be easier to start the two
inside Screws and then slide the Trays into
place before tightening the other six Screws.
Note: It may be necessary to rotate the Console
Frame (101) upward when attaching the Left and
Right Trays (95, 96).
1
1
1
10.
IMPORTANT: To avoid damaging the Pulse
Crossbar (81), do not use power tools and do
not overtighten the #10 x 3/4" Screws (4).
Orient the Pulse Crossbar (81) as shown. Attach
the Pulse Crossbar to the Handrails (79) with
four #10 x 3/4" Screws (4) and four #10 Star
Washers (5).
Start all four Screws, and then
tighten them.
Make sure that the Upright Wire (91) is not
pinched.
Firmly tighten the four 5/16" x 2 3/4"
Screws (12).
10
4
4
5
5
12
12
79
81
79
91