NordicTrack T 23.0 Treadmill Uk Manual - Page 27
How To Use The Maintenance Mode
View all NordicTrack T 23.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Note: If a passcode is enabled, the console will regularly ask for you to enter the passcode. The console will remain locked until the correct passcode is entered. IMPORTANT: If you forget your passcode, enter the following master passcode to unlock the console: 1985. 12. Set a safety screen timeout. The console features an automatic screen reset; if no buttons are touched or pressed and the walking belt does not move for a set amount of time, the console will automatically reset. To set the amount of time the console will wait before it automatically resets, touch the Safety Screen Timeout button to view a list of times. Then, select the amount of time desired. Touch the back button on the screen. 13. Exit the equipment settings mode. To exit the equipment settings mode, touch the back button on the screen. HOW TO USE THE MAINTENANCE MODE 1. Select the settings main menu. To avoid damaging the treadmill, do not turn off the power or remove the key while the firmware is being updated. The screen will show the progress of the update. When the update is complete, the treadmill will turn off and then turn back on. If it does not, press the power switch into the off position. Wait for several seconds, and then press the power switch into the reset position. Note: It may take a few minutes for the console to be ready for use. Note: Occasionally, a firmware update may cause your console to function slightly differently. These updates are always designed to improve your exercise experience. 4. Calibrate the incline system of the treadmill. Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline system. The treadmill will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system. Press the Cancel button to return to the maintenance mode. When the incline system is calibrated, touch the Finish button. See step 1 on page 26. 2. Select the maintenance mode. In the settings main menu, touch the Maintenance button to enter the maintenance mode. IMPORTANT: Keep pets, feet, and other objects away from the treadmill while the incline system is calibrating. In an emergency, pull the key from the console to stop the incline calibration. 5. View machine information. The maintenance mode main screen will show information about the model and version of the treadmill. 3. Update the console firmware. For the best results, regularly check for firmware updates. Touch the Firmware Update button to check for firmware updates using your wireless network. The update will begin automatically. Touch the Machine Info button to view information about your treadmill. After you view the information, touch the back button on the screen. 6. Find keycodes. The Keycodes button is intended to be used by service technicians to identify whether a certain button is working correctly. 7. Exit the maintenance mode. To exit the maintenance mode, touch the back button on the screen. 27